Silvercrest SBTF 10 B2 - Manual (Page 9)

GB
6 SBTF 10 B2
Installing the hands-free appliance
in a vehicle
So that the hands-free appliance can function correctly, it
is connected to the vehicle cigar lighter socket or on-board
power socket and provided with electricity from there.
● Ensure that the hands-free appliance engages completely
and that the operation of the vehicle is not negatively
infl uenced. The LED status indicator 6 blinks twice every
3 seconds and a short high signal tone sounds once. The
appliance is in standby mode.
Note:
It is possible that the cigar lighter only functions when the
vehicle ignition is switched on. In cases of doubt, consult
the operating instructions for the particular vehicle.
Caution:
For vehicles in which the cigar lighter, resp. the vehicle cir-
cuit plug, also functions when the ignition is switched off :
● Use the hands-free appliance only when the motor is
running. Otherwise, the vehicle batteries could become
discharged over an extended period of time.
Note:
When you are not using the hands-free equipment remove
it from the vehicles cigarette lighter socket. Store it in a dry,
dust free location protected from direct sunlight.
Switching the hands-free
appliance on and off
Switching on: The appliance is switched off .
● Press and hold the multi-function button 7 for 3 seconds,
until a short and high signal tone is heard. The LED
status indicator 6 blinks twice every 3 seconds.
Switching off : The appliance is in standby mode.
● Press and hold the multi-function button 7 for 3 seconds,
until a long and deep signal tone is heard. The LED
status display 6 extinguishes.
IB_78534_SBTF10B2_LB4.indb 6 IB_78534_SBTF10B2_LB4.indb 6 20.08.12 09:21 20.08.12 09:21