Silvercrest SKD 1000 A3 - Manual (Page 22)

Cassette Digitizer SilverCrest SKD 1000 A3
20 English
 Input Level: The level meters here show the levels of the input signal on the left and
right stereo channels. You can adjust the signal level using the slide control to the right
of the level indicators. Please make sure that the loudest passages never reach or
exceed the maximum level of 0 dB, otherwise your recording will become clipped
(overmodulated). The “Maximum input level” displayed at the bottom of this section of
the display shows the maximum level measured during the entire recording. The “Reset”
button allows you to delete the stored maximum level and repeat the recording with a
lower level.
If necessary, adjust the level using the Volume Control knob (2) on your digitizer.
5. Once you have digitized the desired tracks or the entire content of the cassette, click on the
"Pause" button to end the recording on the PC, and then press the STOP button (11) on the
cassette digitizer to stop the playback.