Emerson MS9904TTC - Manual (Page 23)

22
CASSETTE OPERATION
PLAYING CASSETTE TAPES
1.) Press the STANDBY/ON button to turn the system "On".
2.) Slide the FUNCTION selector to TAPE position to select the Tape mode.
3.) Press the Stop/Eject key of either deck A or deck B to open the cassette
door.
4.) Insert a prerecorded cassette into the slots on the door with the exposed tape
facing down and the full reel on the left side. Close cassette door.
5.) Press the Play key to begin playback.
6.) Adjust the VOLUME and EQ controls as desired.
7.) When the tape ends the Automatic Stop System releases the Play key and
shuts off the tape motor. Press the Stop/Eject key to open the cassette
door and remove your tape. To stop the tape before it ends press the Stop/
Eject
key at any time.
Fast Forward and Rewind Controls
Press or key to advance or rewind the tape rapidly. When you reach the
desired portion, or the end of the tape, press the Play key to resume normal
playback, or press the Stop/Eject key to shut off the tape motor..
Note: the Automatic Stop System does not function in the fast forward or
rewind modes.
MS9903TT_ib080503.p65 5/8/2003, 11:44 22