Silvercrest SRR 3 A1 - Manual (Page 78)

SilverCrest SRR 3 A1
76 - English
By pulling, you prise the shaving head holder
from its locking mechanism. Then remove the
shaving head holder.
Remove the shaving heads. A shaving head
consists of a guard and a razor blade.
Always clean a guard with the corresponding razor blade because
they work together when the shaver is in use. The shaving results may
deteriorate if the guards and razor blades are interchanged.
Alternatively, you can rinse the shaving heads under running water.
Let the shaving heads dry completely before installing them.
Remove the razor blade from the guard. Then
clean the razor blade carefully with the enclosed
cleaning brush.
Clean the guard with the enclosed cleaning
brush.