Silvercrest SRR 3 A1 - Manual (Page 16)

SilverCrest SRR 3 A1
14 - English
Re-insert the razor blade in the guard.
Re-insert the clean shaving heads in the shaving
unit. Make sure that the slot in the shaving head
lies in the channel of the shaving unit.
Re-insert the shaving head holder in the shaving
unit. Press the centre of the shaving head holder
until it audibly engages.
After cleaning, close the shaving system [2] again
until it audibly engages. Put the protective cover
[1] on again.