Before using for the first time, Cleaning – Silvercrest STYG 2000 A2 User Manual

Page 9

Advertising
background image

STYG 2000 A2

7

5. Before using for the first time

During manufacture, many parts are given a
thin film of protective oil. Before using the
appliance for the first time, heat it up without
any food so that any residues can evaporate.

Note:

When heating up for the first few

times a slight smell may be produced. Make
sure the room is adequately ventilated.
1. Take the appliance and all the accessory

parts out of the packaging.

2. Check that the appliance shows no signs

of damage.

3. Remove any labels or stickers (but

not

the type plate on the underside).

4. Clean the appliance before using it for

the first time. Observe the information in
the chapter entitled "Cleaning" on
page 7.

5. Select a location that is firm, level and

not flammable. Maintain a distance of
approx. 50 cm from other objects.

6. Turn the temperature regulator

3

to "0".

This switches the appliance off.

7. Plug the temperature regulator

3

into the

connecting socket

4

.

8. Plug the mains plug into a suitable wall

socket (see "3.

Technical data" on

page 3).

9. Turn the temperature regulator

3

to "5".

The indicator lamp

2

lights up and the

appliance heats up.

10. Leave the appliance switched on until the

indicator lamp

2

goes out.

11. Switch the appliance off by turning the

temperature regulator

3

to "0".

12. Pull out the mains plug and allow the

appliance to cool down.

13. Wipe the grill plate

6

again with a

damp cloth. The appliance is now ready
to use.

6. Cleaning

Warning!

Allow the appliance to cool down
and pull out the mains plug before
cleaning.
Never immerse mains cable

1

and

temperature regulator

3

in liquids.

Note:

drip tray

9

and grill plate

6

are

dishwasher-safe.
1. Take mains cable

1

and temperature

regulator

3

out of connecting socket

4

.

2. Clean temperature regulator

3

with a

clean, dry cloth. If necessary, you can
also moisten the cloth slightly, but
moisture must never be allowed to get
into the temperature regulator.

3. Carefully remove the drip tray

9

and

dispose of the collected fat.

Note:

Normal domestic quantities can

be disposed of as domestic waste. Do
not pour the fat down the drain, as it
may solidify and cause blockages.

4. Clean drip tray

9

and grill plate

6

in

washing-up water by hand or in a
dishwasher.

5. Clean base section

8

with a damp cloth

or a soft, damp sponge. You may also
use a little mild detergent in order to
help remove fatty deposits.

RP73270 Teppan LB6 Seite 7 Mittwoch, 28. M rz 2012 12:51 12

Advertising