Cleaning and care, Fault rectifi cation, Disposal – Silvercrest SDK 2500 A1 User Manual

Page 34: Storage

Advertising
background image

GB
MT

31

SDK 2500 A1

Cleaning and care

RISK OF ELECTRIC SHOCK

Before cleaning, ALWAYS remove the plug from the mains power socket.

Never submerse the appliance in water or other liquids.

WARNING! RISK OF INJURY!

Allow the appliance to cool down before cleaning it!

CAUTION - PROPERTY DAMAGE!

Do not use abrasive, chemical or caustic cleaning agents to clean this appliance!
These can damage the appliance.

Wipe the appliance with a damp cloth. For stubborn soiling use a mild detergent
on the cloth.
Ensure that you remove all detergent residues with a moist cloth afterwards.

Please wait until the appliance is completely dry before using it again.

Storage

Store the appliance in a dry and dust-free place.

Fault rectifi cation

Malfunction

Cause

Solution

The appliance is
not working.

The plug is not inserted into
a mains power socket.

Connect the plug to the power
supply.

The appliance is defective.

In this case, contact the Customer
Service.

The appliance is not
switched on.

Switch the appliance on using the
On/Off switch 3.

Disposal

Never dispose of the appliance in the normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU (Waste Electrical and Electronic Equipment).

Dispose of the appliance through an approved disposal centre or at your community
waste facility. Please observe the currently applicable regulations. Please contact your
waste disposal centre should you be in any doubt.

IB_60493_SDK2500A1_LB5.indb 31

IB_60493_SDK2500A1_LB5.indb 31

22.04.14 08:34

22.04.14 08:34

Advertising