Silvercrest SFS 150 B3 - Manual (Page 39)

37 SFS 150 B3
GB
MT
Setting up and connecting to the power supply
Items delivered and transport inspection
The appliance is delivered with the following components as standard:
▯ Vacuum Sealer SFS 150 B3
▯ 1 Tube fi lm made of PE-HD (Polyethylene of high density)
▯ This operating manual
NOTICE
► Check the contents to make sure everything is there and for visible damage.
► If the contents are not complete or are damaged due to defective packaging
or through transportation, contact the service hotline (see chapter Service).
Unpacking
♦ Remove the appliance, the tube fi lm and the operating instructions from the
carton.
♦ Remove all packing material.
DANGER
► Packaging material should not be used as a play thing by children. There is
a risk of suff ocation!
Disposal of the packaging
The packaging protects the appliance from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and
reduces the amount of waste generated. Dispose of packaging material that is
no longer needed as per the regionally established regulations.
NOTICE
► If possible preserve the appliance's original packaging during the warranty
period so that in the case of a warranty claim you can package the appliance
properly for return.
IB_71770_SFS150B3_LB5.indb Abs2:37 IB_71770_SFS150B3_LB5.indb Abs2:37 15.02.12 13:42 15.02.12 13:42