Silvercrest SIKP 2000 B1 - Manual (Page 51)

49 GB
11. Disposal
The symbol showing a wheel-
ie bin crossed through indi-
cates that the product requires
separate refuse collection in
the European Union. This ap-
plies to the product and all ac-
cessories marked with this
symbol. Products identified with this symbol
may not be discarded with normal household
waste, but must be taken to a collection point
for recycling electric and electronic applianc-
es. Recycling helps to reduce the consumption
of raw materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
12. Trouble-shooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device
yourself under any circumstances.
13. Technical
specifications
Subject to technical modification.
Fault
Possible causes/
Action
No function
• Has the device been
connected to the pow-
er supply?
• Check the connection.
The cooking
zone is not
heating up
• No cooking vessel on
the cooking zone2?
• Is the cooking vessel
suitable for induction
cooking zones?
Error message
E 1 on the dis-
play
• No cooking vessel on
the cooking zone2?
• Unsuitable cookware
on the cooking zone?
• Cooking vessel not
placed centrally on the
cooking zone?
Error messages
E 2 to E 7
• Contact the Service
Centre (see chapter
Warranty)
Model: SIKP 2000 B1
Mains voltage: 220-240 V ~ 50/60 Hz
Protection class: II
Power rating:
Max. 2000 W
Fault
Possible causes/
Action
__RP90248_B1.book Seite 49 Freitag, 1. März 2013 10:48 10