Silvercrest SMA 500 A1 - Manual (Page 86)

83 SMA 500 A1
GB
Speaker operation
♦ Completely unwind the speaker cable 8 from the
cable storage (underside of device).
♦ Connect the 3.5 mm jackplug of the speaker cable 8
to your playback device.
♦ Switch the speaker on by moving the On/Off switch
4 to the ON position. The operating LED 3 illumi-
nates in blue.
♦ Switch on your player and select the required volume
using the volume control
5 .
♦ To obtain a rich bass tone, move the BASS switch 6
to the ON position.
♦ To switch the speaker off again, move the On/Off
switch
4 to the OFF position. The operating LED 3
goes out.
Aux-In operation
Many electronic entertainment devices are equipped with
a 3.5 mm jack socket. If your player has a connector that
diff ers from the audio output socket, use a suitable adapter if
necessary, or connect it to the AUX-IN
2 connection socket
using an adapter cable. The relevant adapter/adapter
cable is available from specialist dealers.
IB_46771_SMA500A1_LB1.indb 83 IB_46771_SMA500A1_LB1.indb 83 05.02.14 11:58 05.02.14 11:58