Storage, Troubleshooting, Problem cause solution – Silvercrest SHGD 40 A1 User Manual

Page 47

Advertising
background image

45

SHGD 40 A1

GB

Storage

When the appliance is cooling down, always place it on a heat-resistant
surface or hang the appliance up by the suspension loop.

If you do not intend to use the appliance for some time:

Clean the appliance as described in the section "Cleaning".

Press the hot plates 6 together and then press the locking device 4 on the
side

in.

Store the appliance at a clean and dry location.

Troubleshooting

Problem

Cause

Solution

The appliance does
not function.

The plug is not

inserted into

a mains

power socket.

Connect the appliance

with a mains

power socket.

The mains power

socket is defective.

Try another mains

power socket.

The appliance is

defective.

In this case, contact

Customer Services.

The appliance is
not switched on.

Switch the

appliance on.

The hair cannot be
straightened.

The temperature

level is set too low

for your hair.

Select a higher

temperature level.

The appliance is

not yet heated up.

Wait until the appliance

has heated up.

The hair is singed.

The temperature

was too high.

Select a lower

temperature level.

The hair has been

held for too long

between the hot

plates 6.

Always pull the hair

straightener through

the hair.

Never linger for a

prolonged period at

a specifi c point on the

hair.

IB_72506_SHGD40A1_ES_IT_PT.indb Abs2:45

IB_72506_SHGD40A1_ES_IT_PT.indb Abs2:45

09.05.12 14:22

09.05.12 14:22

Advertising
This manual is related to the following products: