Silvercrest SHBS 1000 A1 - Manual (Page 52)

49 SHBS 1000 B1
GB
MT
Appliance description
Figure A:
Cutting set with titanium-coated trimmer block and ceramic trimmer blade
2 Slide switch for cut length fi ne adjustment 0.5 mm / 1 mm / 1.5 mm /
2.0 mm / 2.5 mm
3 On / off switch
4 Charging indicator lamp
5 Charging station / holder with connecting socket for power supply unit
Figure B:
6 Power supply unit
Figure C:
7 Cut length add-ons 4 - 6 mm / 7 - 9 mm / 10 - 12 mm / 16 - 18 mm /
22 - 24 mm / 28 - 30 mm
8 Thinner add-on
Before taking into use
The hair and beard trimmer can be used as a battery-powered or mains-powered
appliance.
Charging the batteries
The batteries for the hair and beard trimmer should be charged for at least 3 hours
before fi rst use. A charging time of 60 minutes is suffi cient for all further charges.
Ensure that the appliance is completely charged before you use it without the
power supply unit
6 . The appliance is fi tted with 2 NiMH rechargeable batteries
and overload protection so that the batteries can be recharged without the
danger of overcharging.
♦ Connect the power supply unit cable 6 to the hair and beard trimmer charging
station 5 .
♦ Avoid damaging the appliance! Ensure that the appliance is switched off before
charging the batteries.
♦ Plug the power supply unit 6 (wide voltage range 100 - 240 V) in a power
socket complying with the appliance specifi cations.
♦ The charging process is displayed using a continuous bar and increasing minute
display in the charging display
4 . The batteries have been completely charged
once the bar in the charging display 4 no longer fl ashes and 60 minutes is
displayed.
♦ Once the batteries are completely recharged, you can use the appliance for
around 60 minutes without connecting it to the power supply.
IB_31711_SHBS1000B1_LB5.indb 49 IB_31711_SHBS1000B1_LB5.indb 49 03.02.14 08:17 03.02.14 08:17