Silvercrest SFA 30 B1 - Manual (Page 17)

SilverCrest SFA 30 B1
English - 15
Connect to compatible mobile phones
Pairing
With the hands-free kit switched off, keep the multifunction button (2) pressed for approx. 9 seconds until a beep
sounds and the LED indicator (4) alternates between flashing orange and blue. The hands-free kit is now in search
mode. Activate the Bluetooth ® function of your mobile phone and let it search for Bluetooth ® devices nearby. For
further details, please read the instructions of your mobile phone. Select the device "SFA 30 B1" from the list of devices
which are found.
If you are asked for a PIN during the pairing process, enter "0000".
The name of the hands-free kit "SFA 30 B1" now appears in the list of devices connected to your mobile phone. The
hands-free kit is now in standby mode and the LED indicator (4) flashes blue once briefly at regular intervals. Once the
device is disconnected, it flashes blue twice.
You can connect or pair additional devices to the hands-free kit in the same manner. The pairing begins for each
device with the hands-free kit switched off as described above.
The hands-free kit then has several "known" devices. This status is a prerequisite for an active connection between the
hands-free kit and other devices. A maximum of 3 devices can be saved as "known devices".
The number of devices that can be actively connected to the hands-free kit is limited to two. As soon as one or two of
the known devices are in the vicinity of the hands-free kit, the connection to these devices is established automatically.
You may need to confirm the connection on your mobile phone. If a third known device now comes in the vicinity of