3 configuring the pc and verifying communications, 1 default serial parameters, 2 determine which com port to use – Enfora GSM2228UG001 User Manual
Page 35: Onfiguring the, Erifying, Ommunications, Default serial parameters, Determine which com port to use
Mini-MT User Guide
Revision 1.02
8.3 Configuring the PC and Verifying Communications.
NOTE: The following examples use Windows 2000 and HyperTerminal. Any
Terminal program should work, using the parameters in Steps 7.3.1 and 7.3.2.
8.3.1 Default Serial Parameters
Baud Rate:
115200 baud rate
Data Bits:
8
Stop Bits:
1
Parity:
None
Flow Control: None
8.3.2 Determine which COM port to use
On older computers, there is usually a built in COM port. This is normally COM1
With a USB connection, you will need to determine which COM port it is using.
1. Open up the System Properties window. This is done through the Control
Panel > System or right-click on My Computer and select Properties. Select
the Hardware Tab. On Windows 2000 the screen looks like the following:
GSM2228UG001 Page 26