Silvercrest SMW 700 A1 - Manual (Page 36)

33 SMW 700 A1
GB
MT
■ The following list can be used as a general aid
in helping you to select the proper cookware.
Cookware
Suitable for
microwave
Heat-resistant glass Yes
Non-heat-resistant glass No
Heat-resistant ceramics Yes
Microwave-compatible
plastic cookware
Yes
Kitchen roll Yes
Metal trays/plates No
Aluminium foil No
Foil containers No
WARNING! RISK OF FIRE!
► Never use metallic objects in the microwave
oven. Metals refl ect the microwave radiation
and it leads to the generation of sparks. This
could cause a fi re and irreparably damage
the appliance!
First use
Installation of the appliance
WARNING! RISK OF FIRE!
► This microwave oven is not suitable for installa-
tion in a kitchen cabinet. Suffi cient ventilation
for the appliance cannot be assured in closed
cabinets. The appliance could be damaged
and there would be the additional risk of fi re!
■ Select a level surface that provides suffi cient
room for ventilating the appliance:
■ Maintain minimum clearance of 10 cm from
adjacent walls/surfaces. Ensure that the door
of the microwave oven can be opened easily.
■ Keep a gap of at least 20 cm free above the
microwave.
■ Make sure that the power plug is easily acces-
sible and can be reached and disconnected in
emergencies or dangerous situations.
■ Do not remove the pads beneath the microwave
oven.
■ Do not block the ventilation openings 1. If you
do, it could cause damage to the appliance.
■ Install the appliance as far away as possible
from radios and televisions. Operation of the
microwave oven can cause interference with
radio and television reception.
ATTENTION! MATERIAL DAMAGE!
► Do not install the microwave above a cooker
or any other appliance that generates heat.
Installation in such a location could cause
damage to the appliance and lead to a subse-
quent cancellation of the warranty provisions.
Preparing the appliance
1) Remove all packaging materials and any stickers
from the appliance.
NOTE
Do not remove the light grey mica
cover plate that is fi tted in the cook-
ing area to protect the magnetron.
2) Position the star rotator 6 on the drive shaft in
the cooking chamber so that it is seated fi rmly
on the drive shaft.
3) Centre the glass plate 5 on the star rotator 6.
4) Insert the plug into a mains power socket. Use
a 230 - 240 V ~, 50 Hz, mains socket with
16 A fuse. We recommend connecting the
microwave oven to a separate mains circuit.
If you are unsure about how to connect the
microwave oven, consult a specialist.