Extron electronic Dual Link DVI Transmitter and Receiver DVI DL 201 Tx - Manual (Page 11)

DVI DL 201 Tx/Rx • Introduction 1-3
EDID Minder — The EDID Minder maintains continuous EDID
(Extended Display Identification Data) communication with
the attached source. This ensures that the DVI source powers
up correctly and maintains a proper video output, even if the
display is off.
Control communications pass-through — The DVI DL 201
passes through RS-232 (two way) or IR (one way) control
signals, to a remote display.
Compact design —
The transmitter is 1U high, a half rack wide
and 3" deep, for easy rack mounting near the source device.
The receiver is 1" high, a quarter rack wide and 3" deep,
allowing multiple mounting options near the display device.
Remote powering of receiver —
A single power supply,
connected to the transmitter, is able to power both the
transmitter and receiver.
DVI DL 201 Rx
DVI-D OUTP
UT
Tx Rx CO NT RO L
PAS S T HR U
12V 0.4A MAX
PO WE R
DV I-D INP
UT
RS- 232
PA SS- THR U
DO NO T
CON NECT
OUTPUT
S
TO LA N
DDC RO UT E
RE MO TE
SP AR E
LOCA L
LOCAL OU
TPUT OUTPUT
1
2
3
PC w/ Dual Link DVI
Output
Local
Monitor
Control
System
Dual Link
DVI Cable
RS-232
RS-232
Extron
DVI DL 201 Tx
Dual Link DVI
Transmitter
Extron
DVI DL 201 Rx
Dual Link DVI
Receiver
CAT 5/5e/6/7 Cables
up to 200 feet
2560 x 1600 Flat Panel
Display with Dual-Link
DVI Input
Typical Application for the DVI DL 201 Tx/Rx