Extron electronic Dual Link DVI Transmitter and Receiver DVI DL 201 Tx - Manual (Page 28)

DVI DL 201 Tx/Rx • Installation
Installation, cont’d
2-16
Single Link/Dual Link DVI
Dual Link DVI carries signals at resolutions up to
2560x1600 @ 60 Hz. Single Link DVI carries signals at
resolutions up to 1920x1200 @ 60 Hz.
Video Resolution
(60 Hz)
Single Link Mode Dual Link Mode
UTP STP UTP STP
1024x768
200'
(60 m)
200'
(60 m)
200'
(60 m)
200'
(60 m)
720p
1080i
1920x1200
100'
(30 m)
125'
(38 m)
200'
(60 m)
200'
(60 m)
1600x1200
1080p
2560x1600
N/A N/A 100'
(30 m)
125'
(38 m)
N The transmission distance varies greatly depending on
signal resolution and on the type of cable, graphic card,
and display used in the system.
To operate in Dual Link mode, all three TP cables are •
required and both the source and display devices must
support Dual Link DVI signals.
To operate in Single Link mode, only TP cables 1 and 2 are
•
required. Dual Link DVI is backwards compatible with
Single Link DVI.
The DVI/HDMI 201 (Single Link) receivers can be used
•
with the DVI DL 201 transmitter, in Single Link mode
(using only TP cables 1 and 2).