Specifications, Reference information – Extron electronic Dual Link DVI Transmitter and Receiver DVI DL 201 Tx User Manual
Page 42
DVI DL 201 Tx/Rx • Reference Information
Reference Information
A-2
Specifications
Video
Maximum data rate....................... 10 Gbps (3.3 Gbps per color)
Maximum pixel clock ................... 330 MHz (165 MHz per link)
Resolution range ........................... Up to 2560x1600 @ 60 Hz
Formats ........................................... RGB and YCbCr digital video
Standards ........................................ DVI 1.0, HDMI 1.2
Video input and loop-through — transmitter
Number/signal type ..................... 1 dual link DVI-D input
1 dual link DVI-D local loop-through
N
Dual link DVI is backwards compatible with all single link
DVI/HDMI signals.
Connectors ..................................... 2 DVI-I female (1 for input, 1 for
loop-through)
Interconnection between transmitter and receiver
Connectors ..................................... (3) RJ-45 per unit for 2 CAT 5/5e/7 or STP
(shielded twisted pair) cables connecting
the transmitter and receiver.
Termination standards.................. TIA/EIA T568A or T568B. Pin
configurations for each standard are
available in the "Installation" chapter.
Signal transmission distance
2560x1600 @ 60 Hz
CAT 5/5e/6/7 STP cable
Up to 125' (38 m)
CAT 5/5e/6 UTP (unshielded twisted pair) cable
Up to 100' (30 m)
Longer distances are possible with lower
rates
N
The transmission distance varies greatly depending on the signal
resolution and on the type of cable, graphics card, and display
used in the system.