Inserting batteries, Massaging, Cleaning – Silvercrest SRM 3 A1 User Manual

Page 24: 6 material damage

Advertising
background image

22

• Do not use different battery types or a

mixture of new and old batteries at the
same time.

• Do not short-circuit the batteries.
• Remove the batteries if the product is not

going to be used for a long time.
Leaking batteries may damage the
product.

4.6 Material damage

Caution! To prevent material damage,
please observe the following:
• Do not expose the device to moisture

and only use in dry rooms.

• Never immerse the device in water.
• Never use the device where it could fall

into water, e.g. in a bathtub.

• Keep the device away from sources of

heat, e.g. a radiator.

5. Inserting batteries

1. Open the zip 3.

Note: The zip can only be opened
around 10 cm wide.

2. Insert 2 batteries (size AA/LR6).

When inserting the batteries, pay
attention to correct polarity (see
labelling on the bottom of the battery
compartment).

3. Close the zip 3.

6. Massaging

1. Use the securing straps to secure the

back massage cushion 2 to the backrest
of a suitable chair .

2. Switch the device on and off using the

ON/OFF button 1.

7. Cleaning

If necessary, clean the device with a soft
brush.
You can also use a soft, damp cloth.

Gra88620 Rückenmassagegerät LB5 Seite 22 Mittwoch, 16. Januar 2013 2:11 14

Advertising