Silvercrest SGP 12 A1 - Manual (Page 9)

GB IE
5. When enough air is in the article turn off the appliance (move On/Off switch to
“0”) and unplug the valve adapter (6).
6. Restore the cap to the valve of the inflatable article.
Deflating
1. Install the correct valve adapter (6) by pushing it over
the pump’s air inlet labelled DEFLATE (1).
2. Remove the cap from the valve of the inflatable article
and plug the valve adapter (6) into the valve of the
inflatable article.
3. Turn on the appliance (move On/Off switch to “I”).
4. When all the air has been removed from the inflatable
article, turn off the appliance (move On/Off switch to
“0”) and unplug the valve adapter (6).
6
1