ELSA Erazor II - Manual (Page 13)

After Installing the Drivers
ELSA ERAZOR II and ELSA VICTORY Erazor LT
7
Changing the resolution
You set the resolution of your graphics board in the Control Panel under Windows.
The ELSA graphics card is normally supplied with software on a CD-ROM. You will find
all the utilities described in this manual on the WINNERware CD – unless they are a com-
ponent of the operating system.
Windows 95 and Windows 98
If you have installed the OpenGL driver, you should be aware that this version of OpenGL
only supports games which are suited. A sleek and minimal range of functions guaran-
tees a rapid games performance.
The ' Settings' are automatically integrated into the Control Panel during the instal-
lation of the WINman Suite. You can use these Settings to tweak your graphics system
for the best performance. The '
Settings' provide some great features. Once you
have specified the graphics board model and the monitor data, the program will automat-
ically detect which settings are possible and which are not. This means, for instance,
that it is impossible for you to select an incorrect refresh rate which might damage your
monitor.
ቢ Click on Start, then select Settings ̈
Control Panel.
ባ You will find the Display program in the Control Panel. When you start this pro-
gram, you are shown a dialog box where you can modified the display settings.