Storage, Disposal, Cleaning the appliance – Silvercrest SFS 150 B3 User Manual

Page 56: Cleaning the collection container, Gb mt

Advertising
background image

53

SFS 150 B3

GB
MT

Cleaning the appliance

Clean the housing of the appliance only with a lightly moistened cloth and a
mild detergent.

Remove glue residue from the sealing wire

gently with your fi ngernail.

Cleaning the collection container

Should food remnants be unintentionally sucked in when vacuuming, the col-
lection container

protects the appliance from damage. Clean the collection

container

, as soon as contamination is visible:

Open the appliance lid and lift the suction connectors

up.

Carefully pull the collection container

out of the appliance by using the

side handles to pull it.

Clean it in lukewarm washing-up water and then allow it to dry well.

Replace the collection container

back into the appliance and fold the

suction connectors

down.

Storage

The appliance has a built-in cable winder on the underside of the housing, on
which you can wrap the power cable when it is not in use. This prevents the
power cable from being pinched, damaged or soiled, and it cannot become
a source of danger by hanging loosely down.

Store the appliance in a clean, dry place away from direct sunlight.

Disposal

Do not dispose of this appliance with your normal household
waste. This product is subject to the provisions of the European
Directive 2002/96/EC-WEEE (Waste Electrical and Electronic
Equipment).

Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility. Observe the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.

Notes on the Declaration of Conformity

In regard to compliance with fundamental requirements
and other relevant provisions, this device complies with
the European Electromagnetic Compatibility Directive
2004/108/EC, RoHS Directive: 2011/65/EU, in addition
to the Low-Voltage Directive 2006/95/EC.

The complete original declaration of conformity can be
obtained from the importer.

Advertising