Silvercrest SVG 2.0 A2 - Manual (Page 35)

English SilverCrest USB 2.0 Video Grabber SVG 2.0 A2
34
Video / S-Video signal
 To transfer images, connect either the S-Video cable (3) (same connectors at both ends of the
cable) or the yellow connector of the AV cable (4) (yellow, red and white connectors at both
ends of the cable) with the respective jacks of the adapter and your desired source.
 Do not plug in both the S-Video cable and the yellow RCA cable at the same time.
Audio signal
 For audio transmission, connect the red and white connectors of the AV cable (4) (yellow, red
and white connectors at both ends of the cable) with the respective jacks of the adapter and
your desired source.
SCART adapter
 If your source does not have a video or S-Video connection, use either the S-Video cable (3)
(same connectors at both ends of the cable) or the yellow connector of the AV cable (4)
(yellow, red and white connectors at both ends of the cable) with the SCART adapter and then
connect this to your source in order to transfer images.
 For audio transmission, also connect the red and white connectors of the AV cable (4) (yellow,
red and white connectors at both ends of the cable) to the SCART adapter and your desired
source.
 Plug the Video Grabber's USB connector into a free USB 2.0 or USB 3.0 port, ensuring your PC is
switched on. Use the enclosed extension cable (6) if necessary to extend the reach of the cable. If
possible, ensure that the Video Grabber is directly connected to your PC (and not via a USB hub).
Only use the device with a USB 2.0 or USB 3.0 connection.
 The operating system will automatically detect the Video Grabber. Follow the instructions on the
screen.
 Use the enclosed software (Power Director) to record your source. The software provides you with
detailed instructions in electronic form.