Silvercrest SMA 500 A1 - Manual (Page 45)

GB
MT
42 SMA 500 A1
Speaker operation
♦ Completely unwind the speaker cable 8 from the cable
storage (underside of device).
♦ Connect the 3.5 mm jackplug of the speaker cable 8 to your
playback device.
♦ Switch the speaker on by moving the On/Off switch 4 to
the ON position. The operating LED 3 illuminates in blue.
♦ Switch on your player and select the required volume using
the volume control
5 .
♦ To obtain a rich bass tone, move the BASS switch 6 to the
ON position.
♦ To switch the speaker off again, move the On/Off switch 4
to the OFF position. The operating LED 3 goes out.
Aux-In operation
Many electronic entertainment devices are equipped with a 3.5 mm
jack socket. If your player has a connector that diff ers from the audio
output socket, use a suitable adapter if necessary, or connect it to the
AUX-IN
2 connection socket using an adapter cable. The relevant
adapter/adapter cable is available from specialist dealers.
NOTE
► If you have connected playback devices to the AUX-IN
connection socket
2 and the speaker cable
8
at the same
time, only the sound from the AUX-IN connection socket 2
will be played.
IB_88754_SMA500A1_LB5.indb 42 IB_88754_SMA500A1_LB5.indb 42 12.04.13 10:28 12.04.13 10:28