Using the earphones, Replacing the ear cushions, Connecting the earphones – Silvercrest SKAO 120 A1 User Manual

Page 39

Advertising
background image

GB

MT

36

SKAO 120 A1

Using the earphones

When putting on the earphones 1, pay attention to the side
indicators “R” (right) and “L” (left) on the earpieces.

Carefully slide one of the earphones 1 deep into the ear canal.
In order to straighten the ear channel somewhat and therefore
make the earphone easier to insert, pull auricle backwards and
upwards a little.

Proceed in the same way to insert the other earphone 1.

Replacing the ear cushions

In the as-delivered condition, the earphones 1 are provided with
medium size ear cushions 2. Depending on the size of your auricle
you can use ear cushions (4 or 5) of a diff erent size from the ones
supplied.

NOTE

The better the ear cushion seals off the ear canal, the better
the sound quality, particularly at lower frequencies.

Use your fi ngers to carefully pull on the ear cushions 2 to detach
them from the earphones 1.

Select suitable ear cushions (4 or 5) from the ones that are
supplied. Push these directly onto the earphones 1 until they slip
into the recesses on the earphones 1.

Connecting the earphones

The earphones 1 are equipped with a 3.5 mm jackplug. Many
electronic entertainment devices are provided with an appropriate
headphone socket. If your audio device has been equipped with
a diff erent headphone connector, you may need to use a suitable
adapter (not supplied).

IB_86343_SKAO120A1_LB5.indb 36

IB_86343_SKAO120A1_LB5.indb 36

08.01.13 11:54

08.01.13 11:54

Advertising