Preparing rice that has not been pretreated – Silvercrest SRK 400 A2 User Manual

Page 11

Advertising
background image

8

SRK 400 A2

GB

5) Now close the lid.

6) Connect the power cable 5 to the socket 8 and insert the mains plug into

the power socket.

7) Switch the appliance on using the On/Off switch 0. The orange control

lamp “

”6 lights up.

8) Press down the function selector switch 7 and cook the rice for the amount

of time specifi ed on the rice packet.

9) When the rice is ready:

If you want to eat the rice immediately, disconnect the plug from the
mains power socket.

If you wish to keep the rice warm (max. 2 hours), press the function
selector switch 7 upwards.

10) When you have removed the rice, switch the device off at the On/Off switch 0

and pull the power plug out of the mains power socket.

NOTE

Some types of easy-cook rice still have to swell after cooking. Always
follow the preparation instructions on the packaging of the rice.

CAUTION - PROPERTY DAMAGE!

Use only the supplied plastic spoon to remove the rice r. Other spoons
may cause damage to the anti-stick coating of the cooking bowl w.

NOTE

You can insert the plastic spoon r into the bracket q at the edge of the
rice cooker. This is always ready to hand!

Preparing rice that has not been pretreated

NOTE

Coat the inside of the cooking bowl w evenly with a little fat or vegetable
oil to achieve a better cooking result.

1) Open the lid by pressing the release 2 and lifting the lid simultaneously.

IB_109177_SRK400A2_LB4.indb 8

IB_109177_SRK400A2_LB4.indb 8

09.01.15 09:46

09.01.15 09:46

DIN A5 148 mm x 210 mm

Advertising
This manual is related to the following products: