Technical data, Before taking into use, Information about the batteries – Silvercrest SAS 7.4 LI A2 User Manual

Page 8: Installation of the wall holder, Mortal danger

Advertising
background image

- 5 -

Technical data

Power adapter 4
Input voltage /
- current:

100 - 240 V ~, 50/60 Hz

max. 300 mA

Output voltage/
- current:

9,6 V

/ 300 mA

Protection class:

II /

Type designation:

SAS 7.4 LI A2-1

A

Ap

pp

plliia

annccee

Input voltage

9,6 V

B

Ba

atttteerriieess

Capacity:

1300 mAh

Batteries:

7,4 V
(2 x 3.7 V Lithium-Ion
Batteries)

Before taking into use

• Remove all packaging materials from the applian-

ce, particularly the protective cap over the On/Off
switch 6.

• Place the dirt container q onto the motor block:

• Slide the plastic tab on the underside of the

handheld vacuum cleaner into the recess in the
dirt container q.

• Press the unlocking button 8 and slide the dirt

container q onto the motor block at the same
time.

• Let go of the unlocking button 8 so that the lok-

king mechanism engages in the recess.
The dirt container q is now sitting securely on
the motor block.

Information about the batteries

1. This hand-held vacuum cleaner is powered by

rechargeable lithium-ion batteries.
Before using the cableless hand vacuum cleaner
for the first time, the batteries must be charged
for at least 24 hours.

2. The batteries reach their full capacity after a

charging period of 24 hours. For care of the
batteries we recommend the following: after the
batteries are charged, remove the power adap-
ter 4 from the mains power socket. Reconnect
the power adapter 4 again with the mains power
socket when the suction power of the appliance is
noticeably weaker.

Installation of the wall holder

Mortal danger!

Ensure that there are no power cables or other con-
duits or pipes in the wall at the location where you
intend to bore the holes for the wall holder 3.
It would be a potentially fatal risk to bore into a
current carrying electric cable!

1. Place the barrel plug 5 of the power adapter 4

into the wall holder 3 as shown in the diagramme.
Secure the barrel plug 5 by turning it.

IB_109560_SAS7.4LIA2_LB4.qxp 11.12.2014 13:53 Uhr Seite 5

Advertising