Silvercrest SHTD 2200 A1 - Manual (Page 39)

36 SHTD 2200 A1
GB
MT
Operation
Heat and blower levels
1) Insert the plug into a power socket.
2) Switch the hair dryer on with the blower level switch .
The hair dryer is fitted with two function switches. With these you can separately
select the strength of the air flow (blower level switch ) and the level of heat
(heat level switch
):
Blower levels
O The hair dryer is switched off
reduced air flow
full power air flow
Heat levels
cold air flow
low heating level
high heating level
3) After use, switch the appliance off in that you place the blower level switch
into position “O”. Then remove the plug from the wall socket.
Cooling level
With the cooling level button
G
you can produce a cooler air flow with
every combination of blower and heat levels.
Ionisation function
With the Ionic switch-in  you can additionally add the ionic function to every
combination of blower and heat level.
When drying the hair using a hair dryer, the hair takes on a static charge and
begins to "fly".
The ionisation function ensures that this charging of the hair is neutralised and
cancelled. The hair becomes soft, supple, shiny and easier to style.