Silvercrest SHTD 2200 A1 - Manual (Page 10)

7 SHTD 2200 A1
GB
Drying and styling hair
■ To quickly dry hair, we recommend first of all using a high blower and heater
setting for a short period. Also, place the Ionic switch-in  at the position
“
”. After drying the hair, switch to a lower blower and heat level to
shape the hairstyle.
■ With the supplied styling jet  you can apply a directed airflow to shape
and style your hair. Fit the styling jet  by pushing it with light pressure onto
the hair dryer so that it snaps into place and sits evenly on the hair dryer.
If you no longer require the styling jet , wait until the appliance has cooled
down and pull it off with a downwards snapping motion:
■ If you wish to dry your hair especially gently, or create a so-called “air-dried
wave”, then use the finger diffusor . Start by removing the styling jet 
with a downwards snapping motion. Fit the finger diffusor by pushing
it with light pressure onto the hair dryer so that it snaps into place and sits
evenly on the hair dryer.If you no longer require the finger diffusor , wait
until the appliance has cooled down and pull it off with a downwards snap-
ping motion:
■ Before you comb your hair out, allow it to cool so that the shaping and styling
can retain its form.
■ For cooling the hair you can use the cooling level button
G
or level
of the heat level switch
.