Silvercrest Z31437 - Manual (Page 13)

13 GB
After using the trimmer, switch the device off by pushing the ON / OFF
switch downwards.
Cleaning, care and storage
Note: Always switch off the product before cleaning it.
Do not use any corrosive or abrasive cleaning agents. These might
damage the surface of the product.
Take the nose and ear hair trimmer attachment 3 off as shown in Fig. C
and clean it carefully under running water. Then fully dry the nose and
ear hair trimmer attachment before re-installation.
Attention: The product is only protected against splash water. Never
immerse it in water. Otherwise, irreparable damage may result.
If there are still hairs in the the nose and ear hair trimmer attachment,
clean it with the a soft brush.
Occasionally place one or two drops of oil onto the blade 4 and
distribute the oil evenly (see Fig. D).
Only use an acid-free oil suitable for electric razor appliances.
To store the device, always put on the protective cap
1 .
Keep the device in a cool, dry location.