Silvercrest 104412-14-01/104412-14-02 - Manual (Page 47)

47 GB/MT
Setting the signal type
The receiver can indicate the reception of a door signal either both
optically and acoustically, acoustically or optically.
Using the signal type selector button 3 , select whether the
signal is to be indicated both optically and acoustically or acous-
tically or optically.
Press the signal type selector button 3 once. An acoustical
signal will sound up and the afterwards the signal indicator 1
will flash. The receiver will now indicate the door signal acousti-
cally and optically. Press again the signal type selector button
3 .
An acoustical signal will sound. The receiver will now indicate the
door signal acoustically. Press again the signal type selector
button
3 . The receiver will now indicate the door signal in an
optical way.
Setting the volume
Press the volume button 5 until the desired volume is reached.
There are a total of 4 possible volume settings: very loud, loud,
medium, soft.