Silvercrest SBL 44 A1 - Manual (Page 12)

10 GB
1. If necessary, remove the plug of the 3.5 mm ste-
reo jack cable13 from the socket AUX6.
2. Push and keep the button pressed fII10 until
the Bluetooth connection indicator1 flashes
blue. An acoustic signal sounds.
3. Switch on the audio device (e.g. smartphone)
and start the Bluetooth connection. The audio
device will now receive the device identifica-
tion "SBL44A1“.
4. Establish a connection to the Bluetooth outdoor
speaker on the audio device. Both devices are
now interconnected. The LED on the device is
lit blue and an acoustic signal sounds.
NOTE: it is possible that audio devices remember
the identification of the device. Thus it is possible
that a new manual connection establishment is not
required while the Bluetooth function is active.
5. Now play a song on the audio device. The
sound is reproduced via the speakers5.
BB58 %OXHWRRWK/DXWVSUHFKHUB%ERRN6HLWH'LHQVWDJ-DQXDU