Risk of electric shock, Safety instructions – Silvercrest SSM 600 C2 User Manual

Page 54

Advertising
background image

51

EDS-SSM 600 C2

GB
MT

Safety instructions

RISK OF ELECTRIC SHOCK

Connect the appliance only to mains power
sockets supplying a mains power voltage of
220 – 240 V ~ / 50 Hz.

In event of operating malfunctions and before
cleaning the appliance, remove the plug from the
mains power socket.

Do not expose the appliance to moisture and do
not use it outdoors.

If liquid gets into the housing, disconnect the ap-
pliance from the mains power socket immediately
and have it repaired by a qualifi ed technician.

Always pull on the plug to disconnect the appliance
from the mains; never pull on the power cable itself.

Do not kink or crush the power cable, and route
the cable so that it cannot be stepped on or
tripped over.

To avoid risks, arrange for defective plugs and/or
power cables to be replaced at once by qualifi ed
technicians or our Customer Service Department.

Do not attempt to open the hand blender’s motor
casing. If you do so, the safety of the appliance is
no longer assured and the warranty will become
void.

Advertising
This manual is related to the following products: