Silvercrest SKH 60 B1 - Manual (Page 44)

42 GB
• To avoid any risk, do not make modifications to the device.
Repairs must be carried out by a specialist workshop or the
Service Centre.
4. Items supplied
1 set of headphones
1 set of operating instructions
5. Operation
• Remove all packing material.
• Check that the device is undamaged.
Connecting
1. Set the sound source to a low volume.
2. Insert the TRS connector7 into the headphone socket of the
sound source (e.g. MP3 player, television).
Put on the headphones
1. Put on the headphones in such a way that the marking R is on
the right and L is on the left.
2. Figure A: Adjust the size of the headphones to your head
size using the two adjustable headphone earpieces3 and5
by pulling out or pushing in the brackets2.
3. Set the volume of the sound source. Ensure that you are still
able to hear sounds in your surroundings.
Connecting a second set of headphones
The socket4 can be used to attach a second set of headphones
with a 3.5 mm TRS connector, to allow a second person to listen in.
__TOZ93018_B2.book Seite 42 Donnerstag, 6. Juni 2013 2:15 14