Silvercrest SBTF 10 C2 - Manual (Page 62)

59 SBTF 10 C2
GB
able for other mobile telephones. To use the hands-free
appliance with a linked mobile phone that is not the last
used mobile phone, the connection must be made via the
Bluetooth
®
menu of the mobile phone.
Separating the connection
If you wish separate the mobile telephone from the hands-
free appliance, for example, to connect it to another
Bluetooth
®
appliance:
●
Switch the hands-free appliance off
or
●
separate the connection over the Bluetooth
®
menu in
the mobile telephone.
You need not erase the coupling with the hands-free appli-
ance in the Bluetooth
® menu to separate the connection.
Re-establishing the connection
If you want to reconnect the hands-free appliance with the
last used mobile phone:
●
Check to see that Bluetooth
®
is activated in the mobile
telephone, then switch the hands-free appliance on.
When connecting to a previously coupled mobile telephone
it is not necessary to enter a pass-code. You can set your
mobile telephone so that when the hands-free equipment is
switched on a connection with the mobile telephone is auto-
matically established. As soon as the hands-free equipment
is connected to the previously coupled mobile telephone a
short, high signal tone is emitted confi rming the connection.
Further information regarding automatic coupling can be
found in your mobile telephone’s operating instructions.
Using the hands-free appliance
After successful coupling, the following functions are
available to you. Some of the described functions are
only possible with a mobile telephone that supports the
Handsfree Profi le (HFP).
IB_93813_SBTF10C2_LB1.indb 59 IB_93813_SBTF10C2_LB1.indb 59 10.10.13 09:40 10.10.13 09:40