Silvercrest PEK 2.3 A1 - Manual (Page 51)

PowerFix PEK 2.3 A1
English - 49
Lighting
The camera head is equipped with 4 LEDs. This lighting can be switched on
with the camera head illumination button [5]. This button can also be used to
gradually increase the brightness of the LEDs by pressing it several times.
When the highest level is reached and the camera head illumination button [5]
is pressed again, the lighting switches itself off.
Screen brightness
The brightness of the screen can be changed with the brightness adjustment
display button [7]. The brightness of the screen is gradually increased when
this button is pressed several times. When the highest level is reached and the
brightness adjustment display button [7] is pressed again, the brightness
adjustment is reset to the default value.
Changing the display
The camera image can be rotated by 180° and mirrored vertically or
horizontally by pressing the view/rotate image button [4]. This setting enables
you to display four different views of your image. When the device is switched
off, the last setting is retained.
Video-out function
You can use this function, for example, to display the images of the camera on
a TV. Depending on the device on which you want to perform the playback,
you will require a connection cable which must have a 3.5mm jack plug on
one side for connecting to the video-out port [9] of the endoscope camera. The
other connector may vary depending on your playback device. For further
details, please read the user manual for your playback device. A connection
cable is not included in the items supplied with the endoscope camera.
To use the video-out function, proceed as follows:
 Switch off the endoscope camera.
 Connect the video-out port [9] of the endoscope camera to your playback
device with a suitable connection cable. Note the corresponding user
manual to adjust your playback device correctly.