Silvercrest Z31183 - Manual (Page 14)

14 GB/IE
Press the T-SET button 4 once in the clock mode or
twice in the weighing mode. A bell-symbol appears in the
LC display
5 .
Note: You can set the time period precisely to the second.
Press and hold the ▲ Z / T button
7 or ▼ UNIT button 6 ,
so that the time readout in the LC display runs faster.
Press the ▲ Z / T button or ▼ UNIT button to set the time in
10 minute intervals.
Press the T-SET button once. Press the ▲ Z / T button or
▼ UNIT button to set the time in 1 minute intervals.
Press the T-SET button once. Press the ▲ Z / T button or
▼ UNIT button to set the time in 10 second intervals.
Press the T-SET button once. Press the ▲ Z / T button or
▼ UNIT button in set time in 1 second intervals.
Press the T-SET button to start the countdown.
Note: You can reset the timer. To do this press the T-SET
button.
A signal sounds as soon as set time period has elapsed.
Press any button to switch off the signal.
Switching off the weighing function
Note: If the appliance has not been used for about 2 minutes,
it switches automatically to the time mode.
Press the ON / OFF button 3 to return manually to the
time mode.
Temperature display
The temperature is shown in °C in the lower right of the
LC display
5 .