Silvercrest SWUB 85 B2 - Manual (Page 10)

10 GB/IE/CY
Special characteristics / Preparations for use
Special characteristics
This electric underblanket has been provided with an
especially soft plush. The textiles used in this elec-
tric underblanket meet the high human ecological
safety requirements of the Öko-Tex Standard 100 as
proven in tests at the Hohenstein Research Institute.
Preparations for use
Placing the electric
underblanket
Starting at the foot end, spread out the electric
underblanket (top, see Fig. B) over the mattress.
The plug-in connector
5 on the electric under-
blanket should be towards the head end
(see Fig. C).
First connect the control unit 1 to the electric
underblanket by plugging the two parts of the
plug-in connector
5 together (see Fig. D).
RISK OF DAMAGE TO THE
PRODUCT AND / OR OTHER
PROPERTY! Please be sure
– the plug-in connector and the cable do not
get pinched on the bedframe.
– the cable does not get wedged between the
bedframe and the mattress.
– the cable does not get severely kinked.
Otherwise the plug-in connector and the
cable could be damaged.
Then place the bottom sheet as usual over
the electric underblanket, so that the electric
underblanket lies between the mattress and
the bottom sheet.
Ensure that the electric underblanket is com-
pletely flat and that it does not become drawn
together or folded during use.
Before use on an adjustable bed, verify the
electric underblanket and the cables will not be
pinched in the hinges, for example, or pushed
together.
Switch the electric underblanket on approxi-
mately 30 minutes before going to bed and
cover it with the top sheet and other bedding.
By doing this you will keep all the heat in.
Switching on / off / Selecting
the temperature
Switching on:
Using the temperature setting switch 3 on the
control unit 1 , set the temperature to setting
1, 2, 3, 4, 5 or 6 to switch on the electric under-
blanket. The function indicator
2 illuminates.
Switching off:
Using the temperature setting switch 3 on the
control unit 1 , set the temperature to setting 0
to switch off the electric underblanket. The
function indicator
2 ceases to illuminate.
Selecting the temperature:
This electric underblanket has a rapid heat-up
feature. Set the control unit to the highest tem-
perature setting (setting 6). This will cause the
electric underblanket to warm up quickly.
When operat-
ing the electric underblanket for
several hours, we recommend set-
ting the control unit to the lowest
temperature to prevent the body
from overheating, potentially result-
ing in burns to the skin or heat stroke.
Temperature levels
Using the temperature setting switch 3 on
the control unit 1 , set the temperature to the
desired temperature setting (see Fig. A).
Setting 0: Off
Setting 1: Minimum heat
Settings 2–5: Customised heat
Setting 6: Maximum heat
The foot zone is the warmest part of the electric
underblanket.