EAW AS460e - Manual

SPECIFICATIONS AS460e
DESCRIPTION
APPLICATION
PERFORMANCE
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 [email protected] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. AS460e/2 pp October 2001 Printed in USA
A 2-way mid/high system in a trapezoidal enclosure. Includes
a horn-loaded 10-in MF cone with Radial Phase Plug™ and a
1.4-in exit/2.5-in voice coil HF neodymium compression driv-
er on a 60° x 45° constant directivity horn. Powering mode
is selectable: bi-amplified or passive MF/HF crossover.
The AS460e is engineered for use in permanent installations.
It provides the mid/high performance capabilities of the
60°(h) ASe Series systems in a separate mid/high module. It
can be used as a stand-alone system for speech-only applica-
tions or, together with an AS415e, AS422e or AS625e LF mod-
ule, provide full range performance in a flexible, modular,
multi-enclosure format. Includes comprehensive 3/8"-16
mounting/suspension points. Six year warranty.
Applications include:
Stadiums Arenas
Performing Arts Centers Houses of Worship
Frequency Response (Hz)
±3 dB 200 Hz to 15 kHz
-10 dB 180 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
Passive MF/HF 107
MF 109
HF 109
Impedance (Ohms)
Passive MF/HF 8
MF 8
HF 8
Power Handling (Watts, Continuous)
Passive MF/HF 450
MF 400
HF 125
Recommended High-Pass Frequency
24 dB/Octave 200 Hz (speech) 300 Hz (with LF)
Calculated Maximum Output (dB SPL @ 1m)
Passive MF/HF Peak 139
MF Peak 141
HF Peak 136
Passive MF/HF Long term 133
MF Long Term 135
HF Long Term 130
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal 60
Vertical 45
Product Group I
System Configuration 2-way, mid/high
Powering Configuration(s) Bi-amplified or passive MF/HF
crossover
MF Subsystem & Loading 1x 10-in cone, Radial Phase
Plug™ horn-loaded
HF Subsystem & Loading 1x 1.4-in exit/2.5-in voice coil
neodymium compression driver
on constant directivity horn
Cabinet Type (shape) Trapezoidal
Enclosure Materials Exterior grade Baltic birch
plywood
Finish Wear-resistant textured black
paint
Connectors 2x 6-Contact terminal barrier
strip, jumpers used for powering
configuration
Suspension Hardware (18) 3/8"-16 threaded mounting/
suspension points (4 each
top, bottom and sides, 2 on back)
Grille Powder coated perforated steel
Dimensions inches millimeters
Height 22.5 572
Width (Front) 24.6 626
Width (Rear) 12.3 312
Depth 23.0 584
Trapezoid Angle 15 degrees per side
Weights pounds kilograms
Net Weight 95 43.2
Shipping Weight 110 50.1
PHYSICAL