Silvercrest Z31437 - Manual (Page 48)

48 GB/MT
Preparing the product for use
Inserting / replacing the battery
To insert / replace the battery 9 , proceed as shown in Fig. B.
Attaching / removing the nose and
ear hair trimmer attachment
To attach/remove the nose and ear hair trimmer attachment 3 , proceed
as shown in Fig. C.
Removing nose and ear hair
Note: Do not use the product if the blade 4 is deformed or damaged.
Attach the nose and ear hair trimmer attachment 3 as described in the
section “Attaching / removing the nose and ear hair trimmer attachment“.
Before using, make sure the nose and ear hair trimmer attachment is
properly attached and fastened.
Switch the device on by pushing the ON / OFF switch 6 upwards.
Carefully insert only the tip of the nose and ear hair trimmer attachment
into the front area of your nostril or ear. Remove the nose or ear hair
with small circular movements.