Getting started, Charging via the charger – Powerfix PMA25A1 User Manual
Page 49
Multipower Light Battery LED PMA25A1
48 - English
Getting Started
The Multipower Light Battery LED PMA25A1,
henceforward named “flashlight”, features a built-in
rechargeable battery. Optionally you can recharge
the built-in battery with the supplied charger
AK00G-1200030VW or the supplied car adapter.
Batteries are subject to discharge when stored for
a long period of time. Therefore, when not using
the flashlight for a long time, recharge the battery
every 3 months.
Charging via the Charger
Remove the protective cover from the jack [4] of
the flashlight.
Insert the small connector from the charger
AK00G-1200030VW [B] into the jack [4] on the
flashlight.
Plug the AK00G-1200030VW [B] into a wall
outlet. During charging the charge indicator [2]
will light red.
A full charging cycle takes at least 8 hours.
Unplug the AK00G-1200030VW [B] from the wall
outlet.