Emerson EWC09D5 B - Manual (Page 22)

– 22 – EN – 22 – – 22 – – 22 – – 22 – – 22 –
REPEAT
REPEAT TITLE / CHAPTER
To activate the repeat function, hit [REPEAT]
during playback.
¡ The repeat mode changes as described below every
time you hit the button.
DVD-V
REPEAT is available only during playback.
CHAPTER TITLE OFF
(current chapter repeat) (current title repeat) (repeat off)
NOTES:
¡ Repeat Title/Chapter is not available with some
scenes.
¡ The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK
To activate the repeat function, hit [REPEAT]
during playback.
¡ The repeat mode changes as described below every
time you hit the button.
CD
TRACK ALL OFF
(current track repeat) (entire disc repeat) (repeat off)
NOTES:
¡ Repeat setting will be cleared when moving to other
track.
¡ Repeat playback does not function during A-B
repeat playback.
A-B REPEAT
1 Hit [A-B] at your chosen starting point.
¡ “ A-” appears briefly on the TV screen.
2 Hit [A-B] again at your chosen end point.
¡ “ A-B” appears briefly on the TV screen, and the
repeat sequence begins.
3 To exit the sequence, hit [A-B].
NOTES:
¡ The A-B repeat section can only be set within the
current title (for DVDs) or current track (for Audio
CDs).
¡ A-B repeat is not available with some scenes in DVD.
¡ To cancel the A point which was set, hit [CLEAR].
¡ A-B repeat playback does not function during title,
chapter, track or all repeat playback.
CD DVD-V
PROGRAM
You may determine the order in which tracks will play.
1 In stop mode, hit [MODE].
¡ The “PROGRAM” screen will appear.
2 Press [ ▲ / ▼] to select a track, then hit
[ENTER].
¡ Hit [CLEAR] to erase the
most recently entered pro-
gram.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4 Hit [PLAY O] to play the programmed tracks.
NOTES:
¡ While the program is being played back, the STOP
works as follows.
¡ Hit [STOP C] once and then [PLAY O] again,
playback will restart from the point where
[STOP C] was hit. (Program continued)
¡ Hit [STOP C] twice and then [PLAY O] again,
playback will restart from the track in the usual
way. (Program canceled)
¡ Up to 99 tracks can be entered.
¡ To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step 2.
¡ If you like to repeat the current track in the program,
hit [REPEAT] several times until “
TRACK”
appears during playback. If you like to repeat the
entire program hit [REPEAT] several times until
“
ALL” appears during playback.
CD
TOTAL 1: 03: 30
RANDOM PLAYBACK
This shuffles the playing order of tracks instead of
playback in the sequence.
1 In stop mode, hit [MODE] twice.
¡ “RANDOM” screen appears.
2 Hit [PLAY O] to start random playback.
NOTE:
¡ If you like to repeat the current track in the random
selection, hit [REPEAT] several times until “
TRACK” appears during playback. If you like to
repeat the entire random selection hit [REPEAT] sev-
eral times until “
ALL” appears during playback.
CD
SPECIAL PLAYBACK FUNCTION
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM