Powerfix DRILL PUMP - Manual (Page 34)

- 32 -
Safety instructions
To avoid the risk of accidents and damage to the
appliance:
• Operate the pump ONLY when it is secured by the supplied mounting
against jolting, twisting and canting.
• Check the pump for a faultfree condition before ever taking it into use.
The pump may not be used if it shows signs of damage.
The drive shaft of the pump does not allow itself to be turned by hand.
This does not indicate that the pump is defective.
• Use only hoses certified as being able to withstand a pressure of at least
3 bars (44 psi).
• Check the plug-in connectors on the hoses for firm seating.
• Take steps to ensure that the fluid being pumped cannot come into contact
with the electric drill during pumping. Should it nonetheless occur, imme-
diately remove the power plug.
• Avoid the intake of coarse dirt, otherwise the pump could be damaged.
If needs be, use a filter on the suction hose.
• This appliance is not intended for use by children or other individuals whose
physical, sensorial or intellectual abilities prevent safe usage of the appli-
ance should they not receive support or supervision in the correct operati-
on of the appliance. Children should be supervised to ensure that they do
not play with the appliance.
IB_66768_Drillpump_LB5.qxd 01.06.2011 10:42 Uhr Seite 32