Powerfix EIM-802 GR - Manual (Page 25)

27 GB
Before use
Setting up the outdoor outlet
sockets with timer
Choose a suitable place for the device.
Using the handle
1 carefully press the device with the ground
spike 5 first into the ground.
Insert the mains plug of the device into a 230 V, 50 Hz electrical
outlet socket installed in compliance with the regulations and fitted
with an RCD device.
Note: Before first use or after a power cut, set the correct time.
Operation
Setting the time
Turn the timer 8 clockwise until the arrow of the time indicator 4
points to the current time.
Programming the time switch
To program the time switch, press the setting pins 7 for the de-
sired switching time downwards. You can program the device in
this way for any number of switching times.
Before use / Operation
66401_Erdspiess_mit_Zeitschaltuhr_content_HU_SI_GB.indd 27 15.07.11 14:46