Powerfix PAH 25 A1 - Manual (Page 54)

Multipower Light Battery LED PAH 25 A1
English - 52
The LEDs
 Slide the mode selector switch [7] to the “LED”
position.
 Press the trigger button [6] to power the flashlight
on.
 Release the trigger button [6] to power the
flashlight off.
The Cold Cathode Lamp
 Press the On/Off button [3] for the cold cathode
lamp [1] to power the flashlight on.
 Press the On/Off button [3] for the cold cathode
lamp [1] again to power the flashlight off.
Continuous Light Mode
For Halogen or LED lighting, continuous operation
is possible.

While the trigger button [6] is pressed, slide the
lock switch for continuous light mode [5]
downwards.
 To stop continuous light mode, press the trigger
button [6] and slide the lock switch for continuous
light mode [5] upwards.