Ericsson R250d PRO - Manual (Page 45)

Not for commercial use
– Ericsson Inc.
 6WRULQJ DQG 5HFDOOLQJ 1XPEHUV
 If you want to search by the location number, press
Ô
until the cursor is on the RECALL: line and
enter the number. The number is shown in the dis-
play.
 You can place a call to the number in the display by
pressing <(6 in Phone Mode or 377 in Radio Mode.
Recalling a Number From Secure Memory
 Follow the previously described steps for opening
RCL Mem. in the MEMORY Menu.
 Press Ô
until the cursor is on the RECALL: line.
 Enter the location of the number stored in secure
memory.
 Press Ñ
. Security Code: is shown in the dis-
play.
 Enter your security code.
 If you enter the correct security code, the number is
shown in the display.
Recalling a Group or Alert Number
Recalling a Group Number or Alert Number operates
the same as normal (non-secure) numbers.
Altering or Erasing Numbers
Altering a Number in Memory
You can alter or delete a number in memory by doing
the following:
 Recall the number as previously described.
 When the number is shown in the display, press
Ô
or
Ñ
to move the cursor to the No: line.
 To add digits to the end of the number, just enter
the digits.
 To replace digits, press &/5 to erase the digits you
want to change and then enter the new digits.
 Press <(6 to store the altered number. The message
Same name in memory 000 Save anyway?
is shown in the display.
 Press <(6 to replace the number you previously
stored with the modified number.
Erasing a Number From Memory
 Press Ñ
.
 Press Ô
until the number and name you want to
erase is shown in the display.
 Press and hold &/5 . Erase memory? Location
000 is shown in the display.
Ditto Lornetta.book Page 40 Thursday, July 13, 2000 3:55 PM