Powerfix Z15003 - Manual (Page 26)

26 GB/MT
off again. Check again that all the screws,
bolts and fixings are firmly seated.
Q
Operation
j Place the workpiece on to the base plate 32
against the rear stop 27 and secure it with the
vice 41 .
Note: Ensure that the workpiece lies against
the base plate 32 .
m CAUTION! DANGER OF INJURY! Ensure
that the length of the workpiece is at least half
the length of the stop 27 , otherwise the work­
piece may become loose and slide out.
j Set the vice 41 so that the workpiece lines up
with the centre of the cutting disc.
j Now switch on the angle grinder and press it
down on to the workpiece.
j Avoid any backwards movement and apply
even pressure on the workpiece.
Q
Cleaning and care
j Use a slightly moist, fluff­free cloth when you
are cleaning or polishing the product.
Q
Disposal
The packaging is made entirely of recycla­
ble materials, which you may dispose of
at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn­out
product.
79200_ES_IT_PT_content.indd 26 9/3/2012 1:02:02 PM