Powerfix Z31361 - Manual (Page 18)

18 GB/IE
use/Cleaning and care
Note: Before starting to unload, make sure that the lashing equipment is
released so that the load can be lifted freely.
¾
Open the ratchet handle
1
into the maximum position (see Fig. A III).
¾
Press the ratchet lock
2
and open the ratchet handle
1
until the end
stop (see Fig. B).
¾
Pull the webbing
4
completely out of the slotted shaft
3
.
¾
Release the lasting strap from the load.
˜
Cleaning and care
Note: Regular care will maintain the quality and functionality of the
lashing strap.
¾
Clean the lashing strap with lukewarm water and pH-neutral cleaning
agents. Avoid corrosive detergents.
¾
The ratchet tensioner should be regularly cleaned and then lightly
greased. When greasing it, make sure that parts that come into
contact with the webbing
4
are not greased.
¾
Store the lashing strap in a dry, well-ventilated cool place.
¾
Avoid contact with chemicals, acids and alkalis as they may damage
the lashing strap.