Powerfix Z32114 - Manual (Page 17)

17 GB
Note: When the battery symbol appears in the
display
2 , replace the battery. With a weak
battery you may receive an inaccurate or false
measurement result.
Use
Measuring distances
1. Slide the function switch 9 to the position
„DISTANCE“. The display 2 is turned on.
2. Hold the appliance horizontally to the wall at
the distance you wish to measure. The ultra-
sonic - transmitter / receiver
16 must point at
the wall at a right angle. Use the vial to do
this
8 : direct the appliance so that the air
bubble in the vial lies between the two marker
lines.
3. Press the READ button 6 . The measured
distance appears in the display.
Note: Hold down the READ button and move
the appliance and move the appliance further
over the surface to be measured. The appli-
ance measures the distance continuously.
These are displayed in the display.
Setting the measuring unit
You can choose between the measuring units of
metre (m) and foot (‘…“).