Eiki LC-XB29N - Manual (Page 17)

17
Installation
ON ON
S-VIDEO IN
COMPUTER /
COMPONENT
AUDIO IN
R
VIDEO IN L
(MONO)
(VARIABLE)
AUDIO OUT
COMPUTER IN 1
DVI-I
USB SERVICE PORT
MONITOR OUT
COMPUTER IN 2
/ COMPONENT IN
Cables used for connection
• VGA Cable (Mini D-sub 15 pin)
✽
• DVI Cable
✽
• DVI-VGA Cable
• USB Cable
• Audio Cables
✽
( ✽ = Not supplied with this projector.)
External Audio Equipment
DVI-VGA
cable DVI
cable
✽
USB cable
Audio cable
(stereo)
✽
Audio cable ✽
(stereo)
Monitor Output
or
Monitor Input
USB port Audio Output
USB
C O M P U T E R /
COMPONENT
AUDIO IN
AUDIO OUT
(stereo)
Audio Input
COMPUTER IN 2
/COMPONENT IN
/MONITOR OUT
Monitor Output
COMPUTER IN 1/
DVI-I
VGA cable ✽
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output. (See Page 49.)
Connecting to a Computer
Unplug the power cords of both the
projector and external equipment from
the AC outlet before connecting cables.
✔
Notes:
•Input sound to the COMPUTER / COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1 / DVI-I and the
COMPUTER IN 2 / COMPONENT IN / MONITOR OUT terminal
as input.
• When connecting the AUDIO OUT to external audio equipment,
the projector's built-in speaker is disconnected.
• When the cable is of the longer variety, it is advisable to use the
COMPUTER IN 1 / DVI-I and not the COMPUTER IN 2 /
COMPONENT IN / MONITOR OUT.
• USB cable connection is needed when operating the computer with
the remote control or using the PAGE ed buttons on the remote
control.